Single Sphere EPDM NBR SBR Csm Neoprene Hypalon Rubber Compensator Expansion Joint

• Customization: Available
• After-sales Service: 7*24hours
• Warranty: 12 Months After Delivery
• Model NO.: DN25-DN1600
• Material: EPDM
• Connection: Flange
• Channel of Product: Factory Direct Sales
• Transport Package: Wooden Case
• Specification: DN25-DN2000
• Trademark: XINQI
• Origin: China
• HS Code: 401699
• Production Capacity: 500 Pieces/Day
• Package Size: 150.00cm * 150.00cm * 60.00cm
• Package Gross Weight: 1200.000kg

Product Description

The rubber expansion joint is generally composed of a smooth waveform compensation element with rubber flanges at both ends and a metal flange. Loose tube structure is often adopted for metal flange.

 

Brief introduction:
The surface of the waveform compensation element is rubber, and the inner layer is sandwich reinforced by several layers of strong fibers or steel strips (wires). The reinforcing interlayer such as reinforcing fiber or steel strip (wire) extends to the rubber flange at both ends, and there is a hard steel wire skeleton in the flange. The rubber expansion joint has a large displacement compensation capacity, which can compensate axial, transverse and angular displacement, reduce noise, reduce vibration and have a certain anti-corrosion capacity. It is characterized by high pressure resistance, good elasticity, large displacement, good vibration absorption and noise reduction effect, and convenient installation, and can be widely used in water supply and drainage, HVAC, fire protection, compressor, paper making, pharmaceutical, ship, water pump, fan and other pipeline systems.

Selection description of flexible rubber joint:
1. The general applicable temperature of rubber joint is - 200~70 ºC. The instantaneous temperature can reach 115 ºC, and the service temperature is 70~115 ºC.
2. Flange rubber joint can be selected with a limiting device when the working pressure and temperature are high (diameter is above 200, temperature is above 70 ºC, and working pressure is above 1.5Mpa).
3. For the rubber joint connected by flange, the bolts connecting the flange shall be threaded from the inner side of the flange to both ends of the flange respectively during installation, with washers or spring washers provided, and the bolts shall be gradually tightened diagonally.
The rubber joint connected by the union shall not be replaced at the left and right ends during installation, so as to avoid leakage or damage of the product.

Advantage:
has ultra-high performance, reliability and service life, so it can improve plant safety and mechanical integrity of equipment. Due to the insertion of specially designed products in rigid piping systems, rubber expansion joints can:
   Reduce displacement
   Improve thermal stability
   Release system strain caused by heat change, load stress, pump pressure fluctuation and sediment wear
   Reduce mechanical noise
  Compensating eccentricity
  Eliminate electrolysis between different metals

Size DN	Size inch	Length  from face to face   by  mm
DN32	1-1/4"	95	130	152	200
DN40	1-1/2"	95	130	152	200
DN50	2"	105	130	152	200
DN65	2-1/2"	115	130	152	200
DN80	3"	135	130	152	200
DN100	4"	150	130	152	200
DN125	5"	165	130	152	200
DN150	6"	180	130	152	200
DN200	8"	210	130	152	200
DN250	10"	230	130	152	200
DN300	12"	245	130	152	200
DN350	14"	255	130	152	200
DN400	16"	255			200
DN450	18"	255			200
DN500	20"	255			200
DN600	24"	260			200
DN700	28"	260
DN750	30"	260
DN800	32"	260
DN900	36"	260/300
DN1000	40"	260/300
DN1200	48"	260/300/350
DN1400	56"	300/350/400
DN1600	64"	300/350/400

a) How can I get more details about your products?
You can send an email to our email address. We will provide catalogue and pictures of our products for your reference.We can also supply pipe fittings, bolt and nut, gaskets etc. We aim to be your piping system solution provider. 
b) How can I get some samples?   
If you need, we will offer you samples for free, but new customers are expected to pay express charge. 
c) Do you provide customized parts? 
Yes, you can give us drawings and we will manufacture accordingly. 
d) To which country have you supplied your products?
We have supplied to Thailand, China Taiwan, Vietnam, India, South Africa, Sudan, Peru , Brazil, Trinidad and Tobago, Kuwait, Qatar, Sri Lanka, Pakistan, Romania, France, Spain, Germany, Belgium, Ukraine etc. (Figures here only include our customers in latest 5 years.). 
e) I can't see the goods or touch the goods, how can I deal with the risk involved?  
Our quality management system conforms to the requirement of ISO 9001:2015 verified by BV. We are absolutely worth your trust. We can accept trial order to enhance mutual trust.