ASME B16.9 Sch20 Sch40 Std Sch80 Steel A234 Wpb Pipe End Cap

• Customization: Available
• After-sales Service: 7*24h
• Warranty: 18months
• Model NO.: DN700 28"
• Head Code: Round
• Connection: Welding
• Shape: Equal
• Material: Carbon Steel
• Technics: Forged
• Certification: ISO, API, ANSI, DIN, JIS, ASME, GB, BS, SH, HG, CE, CCS
• Special Function: High Voltage, Anti Corrosion, Good Elasticity, Low Value Steel
• Application: Chemical
• Port of Delivery: Tianjin
• Size: 1/2"-80" DN15-DN2000
• Delivery Time: 15-20 Days
• Applications: Petroleum, Chemical, Machinery, Boiler
• Coating: Black Painted;Galvanized
• Transport Package: Wooden Case
• Specification: 28" DN700
• Trademark: XINQI
• Origin: China
• HS Code: 730793
• Production Capacity: 1000pieces/Day

Product Description

Descriptions		Size		Remarks		Pictures
Elbow	45°/60°/90°/180°		1/2"-60"		Standard:  ANSI; BS; JIS; DIN; MSS; etc
Cap	Butt Weld Elliptical		1/2"-80"		Material: Carbon steel; Stainless steel; Alloy steel;  Cast iron; etc
Reducer	CON/ECC		1/2"-60"		Structure Technique: Forged and casting flanges.
Tees	Equal/reducer		1/2"-60"		Surface Coating technique: Sand Blast; Lacquering;
Nipple	Threaded/Hex/ Round		1/2"-4"		Surface finishing: black, electro-galvanized, hot-galvanized
Union	Male/female		1/8"-4"		Pressure:3000#-9000#
Outlet	Weldolet/threadolet/socko let		1/8"-4"		Standard:MSS SP-97
Cap	BW Elliptical CAP		1/2"-48"		Best price&high quality
Coupling	SW/Threaded		1/8"-4"		PLE;PSE;TLE,BSE;TOE
Plug	Square/hex/round		1/8"-4"		Large QTY&Lower price
Bushing	Round/Hex/Flush		1/8"-4"		Pressure:3000#-9000#
Swaged nipple	Threaded/Plain		1/8"-4"		SCH10S-SCH80

The pipe cap is a pipe fitting welded on the pipe end or installed on the external thread of the pipe end to cover the pipe
Stainless steel pipe cap is also called plug or head. The pipe cap includes the design of convex pipe cap, conical shell, reducing section, flat cap and tight mouth.

Diameter: DN15-DN1200
Wall thickness: SCH5-SCH160
Standard: ASME DIN JIS BS GB/T JB SH HG
Applications: water, beverage, beer, food, petrochemical, nuclear power, machinery, medical equipment, fertilizer, shipbuilding, waterproof treatment, pipes, etc., pipe fittings welded on the pipe end or installed on the external thread of the pipe end to cover the pipe. It is used to close the pipeline and has the same function as the plug.
Packaging: wooden box, carton service: technical consultation, installation guidance, etc
The r part of the dished pipe cap shall not be spliced, which will reduce the thickness and high stress.
During splicing, only radial and circumferential weld directions are allowed. This requirement may be cancelled in the future for large pipe caps. The splicing distance shall be more than 3 δ, It shall not be less than 100mm (the welding heat affected zone is a high stress zone, and the chemical composition in this zone will be burned. Therefore, it is necessary to avoid the high stress zone, which is related to the thickness. According to practical experience, the stress attenuation length is greater than 3 δ, And not less than 100mm). However, refrigeration equipment is difficult to meet this requirement, which has its particularity.
100% radiographic or ultrasonic testing shall be carried out on the splicing weld of the formed head after splicing, and the qualification level shall follow the equipment shell. The inspection level and proportion of the final formed weld are the same as that of the equipment shell, which is high waste.
For example, if the equipment shell is 20% tested, III is qualified. The butt weld and final weld of the bulkhead are also qualified as III, and the welding joint coefficient is 0.85;
If the equipment shell is 100% tested, II is qualified. The butt weld and the final weld of the bulkhead are also II qualified, and the welding joint coefficient is 1
Therefore, although the bulkhead splicing is 100% tested, the qualification level is different, which follows the equipment shell.
But pay attention to the process and manufacturing process:
The correct method is: blanking (scribing) - small plates assembled into large plates - forming - NDT
If the inspection is not conducted before forming, it is wrong to ensure that it is still qualified after forming. That is to say, NDT refers to the final NDT.

Type	weld carbon /stainless steel stub pipe fitting ends cap dimensions
Size	1/2"-80"(DN15-DN2000)
Connection	welding
Technic	pressed
thickness Varieties	SCH20, SGP, STD, SCH40, SCH80, SCH160
Material	carbon steel Q235B, 20#, A234 WPB CT20, ST20, 09G2S , 09G2C, A420 WPL6 , A403-WP304,A403-WP316,A403-WP316L,A403-WP317,A403-WP321 15CrMo, 12Cr1MoVG  etc.
Standard	BS, DIN ,JIS,etc. ANSI B16.9,  DIN 2617, JIS P2311/2312 , GOST 17379
Quality	first grade
Certification	ISO9001 - 2015, CE, SGS, etc.
Application	petroleum, electricity, chemicals, natural gas, construction, shipbuilding and other fields because of its high pressure, high temperature, etc
Packaging	wooden case,pallet ,container or in accordance with the  requirements of customers
Principle	quality first,customer first,credit first,
Payment	L/C  T/T  D/P...
Surface treatment	Black rust-proof oil, transparent oil, hot galvanizing
Notes	The bevel can be made according to the special requirements of the customers
Others	we can also produce the products accordance with  the requirements of customers